OEM/ODM Series NU-Single Row Cylindrical Roller Bearings Company, Factory

Categories

Series NU-Single Row Cylindrical Roller Bearings

NJ
NU
N
NUP
NJ+HJ

Design Variants
Misalignment
Cage
Tolerance
Internal clearance

Single row cylindrical roller bearings are available in several basic designs that differ from each other in number and arrangement of their flanges, the most important design variants are shown below.

N type bearings features two integral flanges on the inner ring and outer ring without flanges.

NU type bearings features two integral flanges on the outer ring and inner ring without flanges, N and NU type bearings belong to the Non-locating bearings, they are not able to accommodate any axial loads.

NJ type bearings features two integral flanges on the outer ring and one integral flange on the inner ring, this allows them to accommodate axial loads in one direction only.

NUP type bearings have two integral flanges on the outer ring, one integral flange on the inner ting and a loose rib, so it is locating bearing and can accept axial loads in either direction.

NJ type bearings used in conjunction with thrust collars can build a locating bearing, which can accept axial loads in either direction.
DHK single row cylindrical roller bearings have the rolling elements with modified outer diameter and crowning inner ring raceway, which minimize edge loading stresses between the rollers and raceway.

For applications operating under normal conditions the misalignment must not exceed 4 angular minutes.

For applications where higher misalignment may occur, DHK also produce single row cylindrical roller bearings with special crowned inner ring raceways (suffix B) to enable higher misalignments during operation.
DHK single row cylindrical roller bearings are available with all kinds material and design variants of cage upon request.

The most important materials and design variants of DHK single row cylindrical roller bearing cages are shown below.

Reinforced polyamide cages:

TN normal design of polyamide cage features holding lips on both side of roller pocket.

TN1 These are the enforced design of TN type.

TN2 Features holding lips on one side of roller pockets.This make it can raise the wall thickness of the cage at no-holding lip side, and therefore raised the strength of the cages.

Pressed Steel Cage: JP, JP1

Solid brass cages

M (MA, MB): normal design, features cage cover and cage body, rivetted by the steel rivets.

M2 (MA2, MB2): features cage body with round rivetting heads on its self and cage cover.

M6(MA6, MB6): features cage body with square riveting heads on its self and cage cover.

DHK single row cylindrical roller bearings are produced to normal tolerance class (PN) as standard.

DHK also can provide these bearings with closer tolerance class such as P6 and P5, tolerance.

Detailed tolerance values are listed in the chapter of tolerance of radial bearings, page 8.

Tolerances for DHK single row cylindrical roller bearings (excluding tapered roller bearings)

All dimensions shown in (mm):

Tolerances in (um):

Inner Ring

PN/(Normal)

Nominal Bore diameter		Deviation dmp	Variation Vdp Series			Variation Vdmp	Taper bore 1:12 Deviation/ Variation
>	<=	△dmp	7．8．9	0．1	2．3．4	Vdmp	△dmp	△d1mp-dmp	Vdp
2.5 10		0 -8	10	8	6	6	+15 0	+15 0	10
10 18		0 -8	10	8	6	6	+18 0	+18 0	10
18 30		0 -10	13	10	8	8	+21 0	+21 0	13
30 50		0 -12	15	12	9	9	+25 0	+25 0	15
50 80		0 -15	19	19	11	11	+30 0	+30 0	19
80 120		0 -20	25	25	15	15	+35 0	+35 0	25
120 180		0 -25	31	31	19	19	+40 0	+40 0	31
180 250		0 -30	38	38	23	23	+46 0	+46 0	38
250 315		0 -35	44	44	26	26	+52 0	+52 0	44
315 400		0 -40	50	50	30	30	+57 0	+57 0	50
400 500		0 -45	56	56	34	34	+63 0	+63 0	56
500 630		0 -50	63	63	38	38	+70 0	+70 0
630 800		0 -75					+80 0	+80 0
800 1000		0 -100					+90 0	+90 0
1000 1250		0 -125					+105 0	+105 0
1250 1600		0 -160
1600 2000		0 -200

Outer ring

PN/(Normal)

Nominal Outer diameter		Deviation	Variation Vdp Series			Sealed bearing	Variation	Radial runout
>	<=	△Dmp	7．8．9	0．1	2．3．4	2 3 4	VDmp	Kea
6 18		0 -8	10	8	6	10	6	15
18 30		0 -9	12	9	7	12	7	15
30 50		0 -11	14	11	8	16	8	20
50 80		0 -13	16	13	10	20	10	25
80 120		0 -15	19	19	11	26	11	35
120 150		0 -18	23	23	14	30	14	40
150 180		0 -25	31	31	19	38	19	45
180 250		0 -30	38	38	23		23	50
250 315		0 -35	44	44	26		26	60
315 400		0 -40	50	50	30		30	70
400 500		0 -45	56	56	34		34	80
500 630		0 -50	63	63	38		38	100
630 800		0 -75	94	94	55		55	120
800 1000		0 -100	125	125	75		75	140
1000 1250		0 -125						160
1250 1600		0 -160						190
1600 2000		0 -200						220
2000 2500		0 -250						250

DHK single row cylindrical roller bearings are produced to normal tolerance class (PN) as standard.

DHK also can provide these bearings with closer tolerance class such as P6 and P5, tolerance.

Detailed tolerance values are listed in the chapter of tolerance of radial bearings, page 8.

Tolerances for DHK single row cylindrical roller bearings (excluding tapered roller bearings)

All dimensions shown in (mm):

Tolerances in (um):

Inner Ring

PN/(Normal)

Nominal Bore diameter		Deviation dmp	Variation Vdp Series			Variation Vdmp	Taper bore 1:12 Deviation/ Variation
>	<=	△dmp	7．8．9	0．1	2．3．4	Vdmp	△dmp	△d1mp-dmp	Vdp
2.5 10		0 -8	10	8	6	6	+15 0	+15 0	10
10 18		0 -8	10	8	6	6	+18 0	+18 0	10
18 30		0 -10	13	10	8	8	+21 0	+21 0	13
30 50		0 -12	15	12	9	9	+25 0	+25 0	15
50 80		0 -15	19	19	11	11	+30 0	+30 0	19
80 120		0 -20	25	25	15	15	+35 0	+35 0	25
120 180		0 -25	31	31	19	19	+40 0	+40 0	31
180 250		0 -30	38	38	23	23	+46 0	+46 0	38
250 315		0 -35	44	44	26	26	+52 0	+52 0	44
315 400		0 -40	50	50	30	30	+57 0	+57 0	50
400 500		0 -45	56	56	34	34	+63 0	+63 0	56
500 630		0 -50	63	63	38	38	+70 0	+70 0
630 800		0 -75					+80 0	+80 0
800 1000		0 -100					+90 0	+90 0
1000 1250		0 -125					+105 0	+105 0
1250 1600		0 -160
1600 2000		0 -200

Outer ring

PN/(Normal)

Nominal Outer diameter		Deviation	Variation Vdp Series			Sealed bearing	Variation	Radial runout
>	<=	△Dmp	7．8．9	0．1	2．3．4	2 3 4	VDmp	Kea
6 18		0 -8	10	8	6	10	6	15
18 30		0 -9	12	9	7	12	7	15
30 50		0 -11	14	11	8	16	8	20
50 80		0 -13	16	13	10	20	10	25
80 120		0 -15	19	19	11	26	11	35
120 150		0 -18	23	23	14	30	14	40
150 180		0 -25	31	31	19	38	19	45
180 250		0 -30	38	38	23		23	50
250 315		0 -35	44	44	26		26	60
315 400		0 -40	50	50	30		30	70
400 500		0 -45	56	56	34		34	80
500 630		0 -50	63	63	38		38	100
630 800		0 -75	94	94	55		55	120
800 1000		0 -100	125	125	75		75	140
1000 1250		0 -125						160
1250 1600		0 -160						190
1600 2000		0 -200						220
2000 2500		0 -250						250

Model	Dimensions						Rated load		Extreme speed		Bearing dimensions				Oblique retaining ring		Weight
Model	d	D	B	r1 r2 min	r3 r4 min	S ≈	Dynamic load dyn cr	Static load stat cor	Grease lubrication	Oil lubricationoil	E	F	d1 ≈	D1 ≈	B2	B3	Bearings	Oblique retaining ring
NU202E	15	35	11	0.6	0.3	1	12.7	10.4	18000	22000	--	19.3	--	27.8	--	--	0.047	--
NU203E	17	40	12	0.6	0.3	1.2	17.6	14.6	15000	18000	--	22.1	--	32	--	--	0.068	--
NU2203E	17	40	16	0.6	0.3	1	24	22	15000	18000	--	22.1	--	32	--	--	0.091	--
NU303E	17	47	14	1.1	0.6	1.2	25.5	21.2	13000	16000	--	24.2	--	36.8	--	--	0.12	--
NU204E	20	47	14	1	0.6	1	27.5	24.5	13000	16000	--	26.5	--	38.8	--	--	0.132	--
NU2204E	20	47	18	1	0.6	1.8	32.5	31	13000	16000	--	26.5	--	38.4	--	--	0.142	--
NU304E	20	52	15	1	0.6	1.1	31.5	27	11000	14000	--	27.5	--	41.8	--	--	0.151	--
NU2304E	20	52	21	1.1	0.6	2	41.5	39	11000	14000	--	27.5	--	41.8	--	--	0.21	--
NU1005	25	47	12	0.6	0.3	2.4	13.4	12	14000	17000	--	30.5	--	38.9	--	--	0.083	--
NU205E	25	52	15	1	0.6	1.3	29	27.5	12000	15000	--	31.5	--	43.3	--	--	1.14	--
NU2205E	25	52	18	1	0.6	1.7	29	27.5	12000	15000	--	31.5	--	43.3	--	--	0.16	--
NU305E	25	62	17	1.1	1.1	1.5	41.5	37.5	9500	12000	--	34	--	50.1	--	--	0.245	--
NU2305E	25	62	24	1.1	1.1	1.9	57	56	9500	12000	--	34	--	50.1	--	--	0.35	--
NU405M	25	80	21	1.5	1.5	2.2	45	38	8500	10000	--	38.8	--	58.4	--	--	0.625	--
NU1006	30	55	13	1	0.6	2.4	16.6	16	12000	15000	--	36.5	--	45.7	--	--	0.134	--
NU206E	30	62	16	1	0.6	1.4	39	37.5	9500	12000	--	37.5	--	52	--	--	0.21	--
NU2206E	30	62	20	1	0.6	1.6	49	50	9500	12000	--	37.5	--	52	--	--	0.26	--
NU306E	30	72	19	1.1	1.1	1.9	51	48	8500	10000	--	40.5	--	58.3	--	--	0.37	--
NU2306E	30	72	27	1.1	1.1	2.5	73.5	75	8500	10000	--	40.5	--	58.3	--	--	0.528	--
NU406M	30	90	23	1.5	1.5	2.3	71	64	7000	8500	--	45	--	67.8	--	--	0.87	--
NU1007M	35	62	14	1	0.6	2.6	23.6	24.5	10000	13000	--	42	44.5	51.9	4	7.75	0.18	0.02
NU207E	35	72	17	1.1	0.6	1.7	50	50	8500	10000	--	44	--	60.1	--	--	0.305	--
NU2207E	35	72	23	1.1	0.6	2.9	62	65.5	8500	10000	--	44	--	60.1	--	--	0.395	--
NU308E	35	80	21	1.5	1.1	1.7	64	63	7500	9000	--	46.2	--	65.7	--	--	0.485	--
NU2311E	35	80	31	1.5	1.1	3	91.5	98	7500	9000	--	46.2	--	65.7	--	--	0.715	--
NU407M	35	100	25	1.5	1.5	2.6	75	69.5	6300	7500	--	53	--	77.6	--	--	1.05	--
NU1008M	40	68	15	1	0.6	2.7	29	32	9500	12000	--	47	50	57.6	4	8	0.23	0.03
NU208E	40	80	18	1.1	1.1	1.9	53	53	7500	9000	--	49.5	--	67.3	--	--	0.38	--
NU2208E	40	80	23	1.1	1.1	2.3	71	75	7500	9000	--	49.5	--	67.3	--	--	0.49	--
NU308E	40	90	23	1.5	1.5	2.5	81.5	78	6300	7500	--	52	--	74.9	--	--	0.65	--
NU2308E	40	90	33	1.5	1.5	3.5	112	120	6300	7500	--	52	--	74.9	--	--	0.95	--
NU408M	40	110	27	2	2	2.6	93	86.5	5500	6800	--	58	--	85.8	--	--	1.3	--
NU1009M	45	75	16	1	0.6	2.5	32.5	35.5	8500	10000	--	52.5	55.5	63.9	4	8.25	0.29	0.03
NU209E	45	85	19	1.1	1.1	1.9	61	63	7000	8500	--	54.5	--	72.4	--	--	0.5	--
NU2209E	45	85	23	1.1	1.1	2.3	73.5	81.5	7000	8500	--	54.5	--	72.4	--	--	0.6	--
NU3209E	45	85	30.2	1.1	1.1	4	89.1	117.7	6700	7900	--	55.5	--	--	--	--	0.79	--
NU309E	45	100	25	1.5	1.5	2.9	98	100	5600	6700	--	58.5	--	83.1	--	--	1	--
NU2309E	45	100	36	1.5	1.5	3.5	137	153	5600	6700	--	58.5	--	83.1	--	--	1.3	--
NU409M	45	120	29	2	2	2.9	106	100	5000	6000	--	64.5	--	93.9	--	--	1.7	--
NU1010M	50	80	16	1	0.6	2.1	36	41.568	8000	9500	--	57.5	60.5	68.9	4	8.25	0.32	0.04
NU210E	50	90	20	1.1	1.1	2.2	64	68	6700	9500	--	59.5	--	77.4	--	--	0.6	--
NU2210E	50	90	23	1.1	1.1	2.2	78	88	6700	9500	--	59.5	--	77.4	--	--	0.65	--
NU3210M	50	90	30.2	1.1	1.1	4.5	92.6	128	6300	7500	--	60.4	--	--	--	--	0.87	--
NU310E	50	110	27	2	2	3	110	124	5300	6300	--	65	--	91.4	--	--	0.12	--
NU2310E	50	110	40	2	2	4.2	163	186	5300	6300	--	65	--	91.4	--	--	0.19	--
NU410M	50	130	31	2.1	2.1	3	129	125	4500	5300	--	70.8	--	103.6	--	--	2.1	--
NU1011M	55	90	18	1.1	1	2.4	41.5	50	7000	8500	--	64.5	67.5	76.7	5	10	0.47	0.05
NU211E	55	100	21	1.5	1.1	1.7	83	95	6000	7000	--	66	--	85.6	--	--	0.75	--
NU2211E	55	100	25	1.5	1.1	2.2	98	118	6000	7000	--	66	--	85.6	--	--	0.9	--
NU3211M	55	100	33.3	1.5	1.1	4.5	119	171	5600	6700	--	66.9	--	--	--	--	1.2	--
NU311E	55	120	29	2	2	3	134	140	4800	5600	--	70.5	--	100.3	--	--	1.6	--
NU2311E	55	120	43	2	2	4.3	200	228	4800	5600	--	70.5	77.7	100.3	--	--	2.3	--
NU411M	55	140	33	2.1	2.1	3.3	140	137	4300	5000	--	77.2	--	109.9	--	--	2.5	--
NU1012M	60	95	18	1.1	1	3.3	44	55	6700	8000	--	69.5	72.5	81.7	5	10	0.49	0.06
NU212E	60	110	22	1.5	1.5	1.6	95	104	5300	6300	--	72	--	95.1	--	--	1	--
NU2212E	60	110	28	1.5	1.5	2.4	129	153	5300	6300	--	72	--	95.1	--	--	1.2	--
NU312E	60	130	31	2.1	2.1	3	150	156	4300	5000	--	77	--	108.5	--	--	1.9	--
NU2312E	60	130	46	2.1	2.1	4.2	224	260	4300	5000	--	77	--	108.5	--	--	2.9	--
NU412M	60	150	35	2.1	2.1	3.4	166	170	4000	4800	--	83	--	118.8	--	--	3.1	--
NU1013M	65	100	18	1.1	1	3.3	45	58.5	6300	7500	--	74.5	77.5	86.7	5	10	0.52	0.07
NU213E	65	120	23	1.5	1.5	1.4	108	120	5000	6000	--	78.5	--	103.2	--	--	1.05	--
NU2213E	65	120	31	1.5	1.5	1.9	150	183	4800	5600	--	78.5	--	103.2	--	--	1.6	--
NU3213M	65	120	38.1	1.5	1.5	4.5	139	196	4700	5600	--	80.4	--	--	--	--	1.88	--
NU313E	65	140	33	2.1	2.1	1.4	180	190	4000	4800	--	82.5	--	117.4	--	--	2.3	--
NU2313E	65	140	48	2.1	2.1	3.9	245	285	4000	4800	--	82.5	--	117.4	--	--	3.3	--
NU413M	65	160	37	2.1	2.1	3.5	183	186	3800	4500	--	89.3	--	126.9	--	--	3.8	--
NU1014M	70	110	20	1.1	1	3.3	65	81.5	5600	6700	--	80	84	95.3	5	10	0.75	0.08
NU214E	70	125	24	1.5	1.5	1.1	120	137	4500	5300	--	83.5	--	108.2	--	--	1.15	--
NU2214E	70	125	31	1.5	1.5	1.6	156	196	4500	5300	--	83.5	--	108.2	--	--	1.7	--
NU3214M	70	125	39.7	1.5	1.5	4.5	178	216	4700	5600	--	84.8	--	--	--	--	2.22	--
NU314E	70	150	35	2.1	2.1	1.6	204	220	3800	4500	--	89	--	125.6	--	--	2.8	--
NU2314E	70	150	51	2.1	2.1	4.6	275	325	3800	4500	--	89	--	125.6	--	--	4	--
NU414M	70	180	42	3	3	4	224	232	3400	4000	--	100	--	142	--	--	5.5	--
NU1015M	75	115	20	1.1	1	2.5	65.5	85	5300	6300	--	85	89	100.9	5	10	0.75	0.09
NU215E	75	130	25	1.5	1.5	1.2	132	156	4500	5300	--	88.5	--	113.2	--	--	1.25	--
NU2215E	75	130	31	1.5	1.5	1.6	163	208	4500	5300	--	88.5	--	113.2	--	--	1.6	--
NU3215M	75	130	41.3	1.5	1.5	4.5	196	299	4500	5300	--	89	--	--	--	--	2.4	--
NU315E	75	160	37	2.1	2.1	1.8	240	265	3400	4000	--	95	--	135	--	--	3.4	--
NU2315E	75	160	55	2.1	2.1	4.1	325	390	3400	4000	--	95	--	135	--	--	5	--
NU415M	75	190	45	3	3	4.5	260	270	3200	3800	--	104.5	--	149.8	--	--	6.45	--
NU1016M	80	125	22	1.1	1	3.8	76.5	98	5000	6000	--	91.5	96	109.1	6	11.5	1.03	0.13
NU216E	80	140	26	2	2	1.2	140	170	4000	4800	--	95.3	--	121.6	--	--	1.54	--
NU2216E	80	140	33	2	2	2.5	186	245	4000	4800	--	95.3	--	121.6	--	--	2.1	--
NU3216M	80	140	44.4	2	2	5	185	282	4200	5000	--	95.3	--	--	--	--	2.91	--
NU316E	80	170	39	2.1	2.1	2.8	255	275	3200	3800	--	101	--	142.7	--	--	3.95	--
NU2316E	80	170	58	2.1	2.1	3.6	355	425	3200	3800	--	101	--	142.7	--	--	5.9	--
NU416M	80	200	48	3	3	4.6	300	310	3000	3600	--	101	--	158.8	--	--	8.3	--
NU1017M	85	130	22	1.1	1	4	78	104	4800	5600	--	96.5	101	114.1	6	11.5	1.1	0.14
NU217E	85	150	28	2	2	2	163	193	3800	4500	--	100.5	--	130.3	--	--	1.9	--
NU2217E	85	150	36	2	2	2.4	216	275	3800	4500	--	100.5	--	130.3	--	--	2.6	--
NU3217M	85	150	49.2	2	2	5.5	211	316	3800	4500	--	102	--	--	--	--	3.69	--
NU317E	85	180	41	3	3	3	270	300	3000	3600	--	108	--	151.3	--	--	5.3	--
NU2317E	85	180	60	3	3	5	365	450	3000	3600	--	108	--	151.3	--	--	6.9	--
NU417M	85	210	52	4	4	5	335	355	2800	3400	--	113	--	164.8	--	--	9.8	--
NU1018M	90	140	24	1.5	1.1	4	93	125	4500	4300	--	103	108	122.1	6	12	1.4	0.17
NU218E	90	160	30	2	2	1.4	183	216	3600	4300	--	107	--	138.5	--	--	2.4	--
NU2218E	90	160	40	2	2	3.5	240	315	3600	4300	--	107	--	138.5	--	--	3.2	--
NU3218E	90	160	52.4	2	2	6	237	355	3500	4200	--	107	--	--	--	--	4.48	--
NU318E	90	190	43	3	3	3	315	345	2800	3400	--	113.5	--	160.2	--	--	5.4	--
NU2318E	90	190	64	3	3	6	430	530	2800	3400	--	113.5	--	160.2	--	--	8.1	--
NU418M	90	225	54	4	4	5	365	390	2600	3200	--	123.5	--	178.8	--	--	11.5	--
NU1019M	95	145	24	1.5	1.1	4.1	96.5	129	4300	5000	--	108	113	127.1	6	12	1.45	0.18
NU219E	95	170	32	2.1	2.1	1.4	220	265	3200	3800	--	112.5	--	147.4	--	--	2.8	--
NU2219E	95	170	43	2.1	2.1	3.5	285	375	3200	3800	--	112.5	--	147.4	--	--	3.8	--
NU3219E	95	170	55.6	2.1	2.1	6	335	511	3300	4000	--	113.5	--	--	--	--	6.65	--
NU319E	95	200	45	3	3	3.5	335	380	2800	3400	--	121.5	--	168.2	--	--	6.3	--
NU2319E	95	200	67	3	3	7.2	455	585	2800	3400	--	121.5	--	168.2	--	--	9.3	--
NU419M	95	240	55	4	4	5.2	390	430	2400	3000	--	133.5	--	188.8	--	--	13.8	--
NU1020M	100	150	24	1.5	1.1	4.3	98	134	4000	4800	--	113	118	132.1	6	12	1.5	0.18
NU220E	100	180	34	2.1	2.1	1.4	250	305	3200	3800	--	119	--	155.5	--	--	3.44	--
NU2220E	100	180	46	2.1	2.1	3	335	440	3200	3800	--	119	--	155.5	--	--	5.5	--
NU3220M	100	180	60.3	2.1	2.1	7	304	437	3200	3800	--	121	--	--	--	--	6.49	--
NU320E	100	215	47	3	3	3.5	380	425	2600	3200	--	127.5	--	181	--	--	7.7	--
NU2320E	100	215	73	3	3	6.1	570	720	2600	3200	--	127.5	--	181	--	--	12	--
NU420M	100	250	58	4	4	5.7	440	490	2400	3000	--	139	--	197	--	--	15.8	--
NU1021M	105	160	26	2	1.1	4.5	112	153	3800	4500	--	119.5	124.5	140.3	7	13.5	1.9	0.24
NU221E	105	190	36	2.1	2.1	1.4	260	320	3000	3600	--	125.5	--	163	--	--	4.1	--
NU3221E	105	190	65.1	2.1	2.1	7	362	573	3000	3600	--	126.5	--	--	--	--	7.94	--
NU321E	105	225	49	3	3	3.4	335	380	2600	3200	--	135	--	183.8	--	--	9.1	--
NU421M	105	260	60	4	4	5.7	490	540	2200	2800	--	144.5	--	206	--	--	17.5	--
NU1022M	110	170	28	2	1.1	4.5	140	190	3600	4300	--	125	131	149	7	13.5	2.4	0.27
NU222E	110	200	38	2.1	2.1	--	290	365	2800	3400	--	132.5	--	172.4	--	--	4.9	--
NU2222E	110	200	53	2.1	2.1	4	380	520	2800	3400	--	132.5	--	172.4	--	--	6.7	--
NU3222M	110	200	69.8	2.1	2.1	7	364	736	3000	3500	--	132.5	--	--	--	--	10	--
NU322E	110	240	50	3	3	4	415	475	2400	3000	--	143	--	199.9	--	--	10.5	--
NU2322E	110	240	80	3	3	7.2	630	800	2200	2800	--	143	--	199.9	--	--	17	--
NU422M	110	280	65	4	4	6.2	540	610	2200	2800	--	155	--	219.5	--	--	20.8	--
NU1024M	120	180	28	2	1	3.2	150	208	3400	4000	--	135	141	158.8	7	13.5	2.6	0.3
NU224E	120	215	40	2.1	2.1	3.5	335	208	3400	4000	--	143.5	--	186.9	--	--	5.7	--
NU2224E	120	215	58	2.1	2.1	5	450	415	2600	3200	--	143.5	--	186.9	--	--	8.3	--
NU3224M	120	215	76.2	2.1	2.1	7	482	794	2700	3200	--	145	--	--	--	--	11.8	--
NU324E	120	260	55	3	3	4.5	520	600	2200	2800	--	154	--	217.3	--	--	13.4	--
NU2324E	120	260	86	3	3	7.2	780	1020	2000	2600	--	154	--	217.3	--	--	23.5	--
NU424M	120	310	72	5	5	6.9	670	780	1900	2400	--	--	--	242.5	--	--	30.5	--
NU1026M	130	200	33	2	1	5.5	180	250	3000	3600	--	--	--	175	8	16	3.9	0.45
NU226E	130	230	40	3	3	3.6	360	450	2400	3000	--	153.5	--	200.2	--	--	6.5	--
NU2226E	130	230	64	3	3	6	530	735	2400	3000	--	153.5	--	200.2	--	--	10.5	--
NU3226E	130	230	80	3	3	8	511	841	2500	3000	--	155	--	--	--	--	13.8	--
NU326E	130	280	58	4	4	4.5	570	670	2000	2600	--	167	--	233.8	--	--	16.5	--
NU2326E	130	280	93	4	4	8.1	915	1220	1900	2400	--	167	--	233.8	--	--	29.6	--
NU426M	130	340	78	6	5	6.5	790	960	1800	2200	--	185	--	265	--	--	42.6	--
NU1028M	140	210	33	2	1.1	3.8	183	265	2800	3400	--	158	165	185	8	16	4.1	0.48
NU228E.M	140	250	42	3	3	3.7	390	510	2400	3000	--	169	--	215.3	--	--	9.5	--
NU2228E.M	140	250	68	3	3	7	570	830	2200	2800	--	169	--	215.3	--	--	15.5	--
NU3228E.M	140	250	88	3	3	10	596	981	2200	2800	--	168.5	--	--	--	--	17.1	--
NU328E	140	300	62	4	4	5.2	670	800	1900	2400	--	180	--	250.3	--	--	22.5	--
NU2328E	140	300	102	4	4	9.2	1020	1400	1800	2200	--	180	--	250.3	--	--	37.2	--
NU428M	140	360	82	6	5	7	850	1020	1600	1900	--	198	--	281	--	--	49.5	--
NU1930M	150	210	28	2	1.1	--	164	252	2600	3200	--	--	--	--	--	--	--	--
NU2930M	150	210	36	2	1.1	--	204	335	2600	3200	--	--	--	--	--	--	--	--
NU1030M	150	225	35	2.1	1.5	4.2	202	294	2600	3200	--	--	--	--	--	--	--	--
NU230E.M	150	270	45	3	3	4	440	585	2200	2800	242	--	193.7	--	--	--	11.8	--
NU2230E.M	150	270	73	3	3	7.3	655	980	2000	2600	--	182	193.7	231.8	--	--	11.8	--
NU3230E.M	150	270	96	3	3	10	736	1260	2000	2200	--	169.5	176.5	198.1	9	18	5	0.6
NU330E.M	150	320	65	4	4	5.5	800	1000	1800	2200	283	--	210.1	--	--	--	27.5	--
NU2330E.M	150	320	108	4	4	9.8	1160	1600	1700	2000	283	193	--	268.4	--	--	44.8	--
NU430M	150	380	85	6	5	7.5	898	1145	1500	1800	283	213	--	296	--	--	48	--
NU2932M	160	220	36	2	2	--	240	450	2500	3200	--	--	--	--	--	--	--	--
NU1032M	160	240	38	2.1	1.5	4.3	245	355	2400	3000	--	180	188	211.7	10	19	6.2	0.75
NU232E.M	160	290	48	3	3	4.1	500	670	2000	2600	--	195	--	248.2	--	--	14.6	--
NU2232E.M	160	290	80	3	3	7.3	800	1180	1900	2400	--	193	--	249.7	--	--	24.5	--
NU3232E.M	160	290	104	3	3	10	764	1310	1900	2200	--	193.6	--	--	--	--	28.9	--
NU332E	160	340	68	4	4	5.5	865	1060	1600	1900	--	204	--	284.6	--	--	32.3	--
NU332M	160	340	68	4	4	--	860	1050	1500	1800	--	--	--	--	--	--	--	--
NU2332E.M	160	340	114	4	4	10	1320	1830	1600	1900	--	204	--	284.6	--	--	53.5	--
NU3834M	170	215	34	1.1	1	--	187	385	2500	3200	181.5	--	--	--	--	--	2.99	--
NU2934M	170	230	36	2	1.1	--	211	360	2500	3200	181.5	--	--	--	--	--	4.24	--
NU1034M	170	260	42	2.1	2.1	6.9	300	430	2200	2800	--	193	200.9	227.7	11	21	8.4	1
NU3034M	170	260	67	2.1	2.1	--	510	875	2200	2800	193	--	--	--	--	--	13.4	--
NU234E.M	170	310	52	4	4	4.3	585	780	1800	2200	--	207	--	267.1	--	--	18.2	--
NU2234E.M	170	310	86	4	4	7.2	950	1400	1700	2000	--	205	--	268.5	--	--	29.8	--
NU3234M	170	310	110	4	4	10	891	147	1800	2100	--	205.5	--	--	--	--	35.5	--
NU334E.M	170	360	72	4	4	7	800	1020	1600	1900	--	220	--	292.5	--	--	38	--
NU2334E.M	170	360	120	4	4	13	1220	1760	1500	1800	--	220	--	292.5	--	--	63.5	--
NU3334E.M	170	360	140	4	4	--	1350	1980	1400	1700	--	220	--	--	--	--	72.1	--
NU3836M	180	225	34	2.1	2.1	--	192	405	2200	2800	--	191.5	--	--	--	--	3.15	--
NU1936M	180	250	33	2.1	2.1	--	219	355	2200	2800	--	198	--	--	--	--	4.92	--
NU2936M	180	250	42	2.1	2.1	--	255	430	2200	2800	--	198	--	--	--	--	6.18	--
NU1036M	180	280	46	2.1	2.1	7	360	520	2200	2800	--	205	214.1	244.7	12	22.5	10.9	1.3
NU3036M	180	280	74	2.1	2.1	--	365	955	1800	2400	--	--	--	--	--	--	--	--
NU236E.M	180	320	52	4	4	4.5	610	830	1800	2200	--	217	--	277.2	--	--	18.9	--
NU2236E.M	180	320	86	4	4	7.2	1000	1500	1700	2000	--	215	--	278.6	--	--	31.2	--
NU3236E.M	180	320	112	4	4	--	950	1560	1700	2000	--	218	--	--	--	--	39.6	--
NU336M	180	380	75	4	4	6.9	900	1160	1500	1800	--	232	--	308..5	--	--	44	--
NU2336M	180	380	126	4	4	13	1370	2000	1400	1700	--	232	--	308.5	--	--	74	--
NU3336M	180	380	150	4	4	--	600	2410	1300	1600	--	232	--	--	--	--	8.64	--
NU2838M	190	240	30	2.1	2.1	--	180	355	2200	2800	--	203	--	--	--	--	3.22	--
NU2938M	190	260	42	2.1	2.1	--	260	450	2200	2800	--	208	--	--	--	--	6.42	--
NU1038M	190	290	46	2.1	4	5	365	550	2000	2600	--	215	225	254.5	12	22.5	11.4	1.4
NU3038M	190	290	75	2.1	2.1	--	565	1010	1800	2200	--	215	--	--	--	--	18.4	--
NU238E.M	190	340	55	4	4	1.7	680	930	1700	2000	--	230	--	293.6	--	--	22.8	--
NU2238E.M	190	340	92	4	4	8	1100	1660	1600	1900	--	228	--	295	--	--	37.9	--
NU3238M	190	340	120	4	4	--	1070	1780	1400	1600	--	231	--	--	--	--	49.3	--
NU338M	190	400	78	5	5	7.1	965	1250	1400	1700	--	245	--	324.3	--	--	50.5	--
NU2338M	190	400	132	5	5	13.5	1500	2200	1400	1700	--	245	--	324.3	--	--	88.5	--
NU3338M	190	400	155	5	5	--	1730	2630	1200	1500	--	245	--	--	--	--	99.2	--
NU1940M	200	280	38	2.1	2.1	--	268	425	2200	2800	--	220	--	--	--	--	7.22	--
NU2940M	200	280	48	2.1	2.1	--	365	630	2200	2800	--	220	--	--	--	--	9.24	--
NU1040M	200	310	51	2.1	2.1	8.3	400	600	1900	2400	--	229	239.4	270.1	13	25.5	14.8	1.7
NU240E.M	200	360	58	4	4	5	750	1040	1600	1900	--	243	--	310.1	--	--	26.9	--
NU2240E.M	200	360	98	4	4	8.1	1220	1860	1500	1800	--	241	--	311.5	--	--	45.7	--
NU3240	200	360	128	4	4	--	1100	1810	1500	1800	--	224	--	--	--	--	58	--
NU340M	200	420	80	5	5	7.5	965	1250	1400	1700	--	260	--	339.3	--	--	57.5	--
NU2340M	200	420	138	5	5	15	1500	2200	1300	1600	--	260	--	339.3	--	--	99	--
NU3340M	200	420	165	5	5	--	1730	2660	1200	1500	--	260	--	--	--	--	115	--
NU1944M	220	300	38	2.1	1.5	--	295	495	1900	2400	--	240	--	--	--	--	7.88	--
NU2944M	220	300	48	2.1	1.5	--	370	660	1900	2400	--	240	--	--	--	--	9.93	--
NU1044M	220	340	56	3	3	6.2	510	765	1700	2000	--	250	262	297.3	14	27	19.3	2.2
NU244M	220	400	65	4	4	6	750	1060	1500	1800	--	270	--	334.3	--	--	38.1	--
NU2244M	220	400	108	4	4	11.8	1120	1800	1400	1700	--	270	--	334.3	--	--	63.5	--
NU344M	220	460	88	5	5	8	1180	1560	1300	1600	--	284	--	373.3	--	--	75.5	--
NU3344M	220	460	180	5	5	--	2130	3300	800	1100	--	284	--	--	--	--	140.6	--
NU1948M	240	320	38	2.1	2.1	--	315	550	2000	2400	--	260	--	--	--	--	8.68	--
NU2948M	240	320	48	2.1	2.1	--	385	710	2000	2400	--	260	--	--	--	--	10.7	--
NU1048M	240	360	56	3	3	8.5	540	850	1600	1900	--	270	282	317.3	14	27	20.7	2.4
NU248M	240	440	72	4	4	7	930	1340	1300	1600	--	295	--	367.3	--	--	51.5	--
NU2248M	240	440	120	4	4	12.8	1430	2320	1300	1600	--	295	--	367.3	--	--	85.9	--
NU348M	240	500	95	5	5	8.9	1400	1930	1200	1500	--	310	--	405.3	--	--	96.2	--
NU2348M	240	500	155	5	5	17	2080	3150	1100	1400	--	310	--	405.3	--	--	157	--
NU1952M	260	360	46	2.1	2.1	--	435	760	1900	2200	--	286	--	--	--	--	14.4	--
NU2952M	260	360	60	2.1	2.1	--	535	995	1900	2200	--	286	--	--	--	--	18.6	--
NU1052M	260	400	65	4	4	10.5	655	1020	1500	1800	--	296	309.6	349.7	16	31.5	30.8	3.3
NU252M	260	480	80	5	5	5	1140	1630	1200	1500	--	320	--	399.3	18	33	68.3	6.2
NU2252M	260	480	130	5	5	12.8	1760	2900	1100	1400	--	320	--	399.3	--	--	112	--
NU2052EM	260	480	82	5	5	--	1100	1800	1100	1400	--	294	--	--	--	--	40.5	--
NU352M	260	540	102	6	6	9.4	1600	2200	1100	1400	--	336	--	437.3	--	--	120	--
NU2352M	260	540	165	6	6	18	2320	3550	1000	1300	--	336	--	437.3	--	--	195	--
NU1956M	280	380	46	2.1	2.1	--	450	815	1800	2200	--	306	--	--	--	--	15.2	--
NU2956M	280	380	60	2.1	2.1	--	575	1150	1500	1800	--	306	--	--	--	--	--	--
NU1056M	280	420	65	4	4	10.5	680	1100	1400	1700	--	316	329.6	369.7	16	31.5	32.8	--
NU256M	280	500	80	5	5	7.5	1120	1660	1200	1500	--	340	--	419.3	--	--	71.8	--
NU2256M	280	500	130	5	5	12.8	1760	2900	1100	1400	--	340	--	419.3	--	--	117	--
NU2356M	280	580	175	6	6	--	2570	3950	900	1200	--	362	--	--	--	--	236	--
NU356M	280	580	108	6	6	22	1800	2500	1000	1300	--	362	--	469.3	--	--	147	--
NU1960M	300	420	56	3	3	--	555	975	1600	2000	--	332	--	--	--	--	24.4	--
NU2960M	300	420	72	3	3	--	725	1370	1400	1700	--	332	--	--	--	--	30.3	--
NU1060M	300	460	74	4	4	12	900	1430	1200	1500	--	340	356	403.69	19	36	46.3	5.4
NU260M	300	540	85	5	5	7.2	1400	2040	1100	1400	--	364	--	453.3	--	--	89.9	--
NU2260M	300	540	140	5	5	14	2080	3400	1000	1300	--	364	--	453.3	--	--	148	--
NU360M	300	620	109	7.5	7.5	9.5	2080	3000	900	1100	--	388	--	506.7	--	--	168	--
NU1964M	320	440	56	3	3	--	580	1050	1100	1400	--	352	--	--	--	--	25.7	--
NU2964M	320	440	72	3	3	--	755	1470	1100	1400	--	352	--	--	--	--	33.5	--
NU1064M	320	480	74	4	4	11.5	915	1500	1200	1500	--	360	376	423.1	19	36	.48.7	5.5
NU264M	320	580	92	5	5	8.3	1600	2360	1000	1300	--	390	--	485.3	--	--	113	--
NU2264M	320	580	150	5	5	--	2260	3700	900	1200	--	390	--	--	--	--	181	--
NU1968M	340	460	56	3	3	--	600	1120	1100	1400	--	372	--	--	--	--	27.1	--
NU2968M	340	460	72	3	3	--	780	1570	1100	1400	--	372	--	--	--	--	33.7	--
NU1068M	340	520	82	5	5	12.5	1120	1830	1100	1400	--	385	403	456	21	39.5	65	7.1
NU268M	340	620	92	6	6	--	1590	2410	900	1200	--	420	--	--	--	--	128	--
NU1972M	360	480	56	3	3	--	605	1160	1200	1500	--	392	--	--	--	--	68.8	--
NU2972M	360	480	72	3	3	--	790	1630	1000	1300	--	392	--	--	--	--	36.7	--
NU1072M	360	540	80	5	5	12.5	1140	1900	1100	1400	--	405	423	476.4	21	39.5	68.2	7.6
NU272M	360	650	95	6	6	--	1650	2560	900	1100	--	445	--	--	--	--	--	--
NU2272M	360	650	170	6	6	--	3500	6050	800	100	--	435	--	--	--	--	--	--
NU2372M	360	750	224	7.5	7.5	--	4950	8700	700	850	--	455	--	--	--	--	--	--
NU1976M	380	520	65	4	4	--	775	1470	850	1200	--	418	--	--	--	--	41.2	--
NU1076M	380	560	80	5	5	12.5	1180	2000	1000	1300	--	425	--	496.7	--	--	71.2	--
NU276M	380	680	95	6	6	--	1700	2700	850	1000	--	470	--	--	--	--	158	--
NU2276M	380	680	175	6	6	--	3100	5250	750	900	--	--	--	--	--	--	--	--
NU1980M	400	540	65	4	4	--	785	1520	1000	1200	--	438	--	--	--	--	43	--
NU2980M	400	540	82	4	4	--	1060	2250	900	1100	--	438	--	--	--	--	54.9	--
NU1080M	400	600	90	5	5	13.5	1370	2320	950	1200	--	450	--	526.5	--	--	92.5	--
NU2280M	400	720	185	6	6	--	4300	7800	800	950	--	485	--	--	--	--	344	--
NU1984M	420	560	65	4	4	--	830	1660	900	1100	--	458	--	--	--	--	45	--
NU2984M	420	560	86	4	4	--	1080	2320	900	1100	--	458	--	--	--	--	58.2	--
NU1084M	420	620	90	5	5	15	1400	2450	900	1100	--	470	--	549.5	--	--	96.2	--
NU2284M	420	760	195	7.5	7.5	--	4400	8200	750	900	--	515	--	--	--	--	406	--
NU2988M	440	600	95	4	4	--	1300	2760	900	1100	--	484	--	--	--	--	79.9	--
NU1088M	440	650	94	6	6	9.8	1560	2750	850	1000	--	493	--	575.7	--	--	110	--
NU2288M	440	790	200	7.5	7.5	--	4850	8650	700	850	--	530	--	--	--	--	446	--
NU1992M	460	620	74	4	4	--	1170	2260	800	950	--	500	--	--	--	--	63.2	--
NU2992M	460	620	95	4	4	--	1650	2930	800	950	--	502	--	--	--	--	68.1	--
NU1092M	460	680	100	6	6	10.5	1660	3000	850	1000	--	516	--	601.5	--	--	129	--
NU2292	460	830	212	7.5	7.5	--	4500	7900	400	480	--	560	--	--	--	--	85	--
NU1996M	480	650	78	5	5	6.8	1140	2240	900	1100	--	525	--	592	--	--	77.5	--
NU2996M	480	650	100	5	5	--	1600	3450	400	480	--	525	--	--	--	--	98.5	--
NU1096M	480	700	100	5	5	15.9	1140	2240	900	1100	--	536	--	620	--	--	128	--
NU19/500M	500	670	78	5	5	6.8	1140	2240	850	1000	--	545	--	606.8	--	--	80.4	--
NU29/500	500	670	100	5	5	--	1870	4300	750	900	--	543	--	--	--	--	101	--
NU10/500M	500	720	100	6	6	10.5	1760	3200	800	950	--	556	--	641.7	--	--	139	--
NU20/500M	500	720	128	6	6	--	2720	5600	630	750	--	553	--	--	--	--	180	--
NU12/500	500	920	185	7.5	7.5	--	5180	8450	560	670	--	604	--	--	--	--	585	--
NU19/530	530	710	82	5	5	--	1460	2910	750	900	--	575	--	--	--	--	92	--
NU29/530	530	710	106	5	5	--	2180	4600	750	900	--	573	--	--	--	--	119	--
NU10/530	530	780	112	6	6	--	2200	4050	670	800	--	593	--	--	--	--	190	--
NU20/530	530	780	145	6	6	--	3500	7100	560	670	--	591	--	--	--	--	255	--
NU28/560M	560	680	72	3	3	--	985	2610	700	850	--	594	--	--	--	--	55.6	--
NU19/560M	560	750	85	5	5	7.5	1430	2900	750	900	--	610	--	679.8	--	--	110	--
NU10/560M	560	820	115	6	6	12.3	2700	5100	630	750	--	626	--	713	--	--	215	--
NU20/560M	560	820	150	6	6	--	3650	6890	530	630	--	--	--	--	--	--	--	--
NU12/560M	560	1030	206	9.5	9.5	--	6970	10200	480	560	--	--	--	--	--	--	--	--
NU18/600M	600	730	60	3	3	--	865	1990	670	800	--	--	--	--	--	--	--	--
NU28/600M	600	730	78	3	3	--	1180	3050	670	800	--	--	--	--	--	--	--	--
NU19/600M	600	800	90	5	5	--	1590	3400	630	750	--	--	--	--	--	--	--	--
NU29/600M	600	800	118	5	5	--	2760	3400	630	750	--	--	--	--	--	--	--	--
NU10/600M	600	870	118	6	6	13.9	2750	5050	580	480	--	667	--	779	--	--	240	--
NU20/600M	600	870	155	6	6	--	3970	7800	500	600	--	--	--	--	--	--	--	--
NU28/630M	630	780	88	4	4	--	1460	3780	630	750	--	--	--	--	--	--	--	--
NU19/630M	630	850	100	6	6	8.5	1830	3750	670	800	--	688	--	768.5	--	--	169	--
NU29/630M	630	850	128	6	6	--	3100	6800	600	700	--	683	--	--	--	--	220	--
NU10/630M	630	920	128	7.5	7.5	--	3200	6000	450	530	--	702	--	--	--	--	285	--
NU20/630M	630	920	170	7.5	7.5	--	4500	9000	480	560	--	699	--	--	--	--	285	--
NU28/670M	670	820	88	4	4	--	1500	3950	560	670	--	711	--	--	--	--	103	--
NU38/670M	670	820	112	4	4	--	1920	5200	530	630	--	711	--	--	--	--	128	--
NU19/670M	670	900	103	6	6	--	2100	4500	530	630	--	3728	--	--	--	--	195	--
NU10/670M	670	980	136	7.5	7.5	--	3500	5890	430	500	--	747	--	--	--	--	350	--
NU20/670M	670	980	180	7.5	7.5	--	5160	9800	430	500	--	746	--	--	--	--	480	--
NU18/710M	710	870	74	4	4	--	1400	3080	530	630	--	750	--	--	--	--	97.5	--
NU19/710M	710	950	106	6	6	9.3	2080	4400	600	700	--	774	--	860.6	--	--	219	--
NU29/710M	710	950	140	6	6	--	3450	8400	500	600	--	766	--	--	--	--	295	--
NU10/710M	710	1030	140	7.5	7.5	17	4650	8300	400	450	--	774	--	860.6	--	--	420	--
NU20/710M	710	1030	185	7.5	7.5	--	5600	11200	400	480	--	787	--	--	--	--	540	--
NU18/750M	750	920	78	5	5	--	1240	3240	500	600	--	794	--	--	--	--	110	--
NU28/750M	750	920	100	5	5	--	1860	5000	500	600	--	797	--	--	--	--	145	--
NU19/750M	750	1000	112	6	6	--	2600	5760	480	560	943	--	--	--	--	--	265	--
NU10/750M	750	1090	150	7.5	7.5	--	4650	8600	360	430	--	832	--	--	--	--	490	--
NU20/750M	750	1090	195	7.5	7.5	--	6700	13800	360	430	--	832	--	--	--	--	635	--
NU38/800M	800	980	136	5	5	--	2530	7050	400	480	--	848	--	--	--	--	219	--
NU19/800M	800	1060	115	6	6	10	2450	5400	530	630	--	870	--	965.4	--	--	287	--
NU29/800M	800	1060	150	6	6	--	3550	8570	400	480	--	873	--	--	--	--	385	--
NU28/850	850	1030	106	5	5	--	2130	5950	--	--	--	900	--	--	--	--	183	--
NU19/850	850	1120	118	6	6	--	2780	6350	--	--	--	925	--	--	--	--	320	--
NU29/850	850	1120	155	6	6	--	4450	10500	--	--	--	917	--	--	--	--	426	--
NU18/900	900	1090	85	5	5	--	1890	4500	--	--	--	949	--	--	--	--	170	--
NU28/900	900	1090	112	5	5	--	2580	7100	--	--	--	950	--	--	--	--	217	--
NU38/900	900	1090	140	5	5	--	2990	8600	--	--	--	950	--	--	--	--	269	--
NU29/900	900	1180	165	6	6	--	5000	11000	--	--	--	969	--	--	--	--	560	--
NU29/950	950	1250	175	7.5	7.5	--	5160	12000	--	--	--	1024	--	--	--	--	584	--
NU18/1000	1000	1220	100	6	6	--	2550	6060	--	--	--	1053	--	--	--	--	264	--
NU28/1000	1000	1220	128	6	6	--	3220	8880	--	--	--	1058	--	--	--	--	319	--
NU38/1060	1060	1280	165	6	6	--	3750	11300	--	--	--	1120	--	--	--	--	427	--
NU29/1060	1060	1400	195	7.5	7.5	--	6900	16700	--	--	--	1142	--	--	--	--	870	--
NU39/1060	1060	1400	250	7.5	7.5	--	8900	23900	--	--	--	1146	--	--	--	--	1070	--
NU18/1120	1120	1360	106	6	6	--	3400	8500	--	--	--	1180	--	--	--	--	335	--
NU38/1120	1120	1360	180	6	6	--	5700	17300	--	--	--	1180	--	--	--	--	547	--
NU18/1180	1180	1420	106	6	6	--	2960	7180	--	--	--	1242	--	--	--	--	350	--
NU19/1250	1250	1630	170	7.5	7.5	--	6300	15400	--	--	--	1350	--	--	--	--	952	--
NU18/1320	1320	1600	122	6	6	--	3650	9070	--	--	--	1395	--	--	--	--	530	--
NU19/1320	1320	1720	175	7.5	7.5	--	7000	17100	--	--	--	1424	--	--	--	--	1100	--
NU29/1320	1320	1720	230	7.5	7.5	--	10400	28800	--	--	--	1420	--	--	--	--	1480	--
NU39/1320	1320	1720	300	7.5	7.5	--	128000	32500	--	--	--	1410	--	--	--	--	1950	--

Ningbo DHK Precision Bearing Co., Ltd.

0+

Years Experience Working

0+

Customer Service

0+

Patented Technology

CERTIFICATE

DHK has passed IATF16949 quality system certification and ISO14001 environmental management system certification；and DHK is a national high-tech enterprise.

What are the potential consequences of using improper or damaged rolling mill bearings in terms of safety and performance?

2024-05-07 Industry News

Using improper or damaged rolling mill bearings can have significant consequences in terms of safety and performance: Increased risk of machinery failure: The ramifications of be...

How do environmental factors, such as temperature and humidity, affect the performance of rolling mill bearings?

2024-05-01 Industry News

Environmental factors like temperature and humidity can significantly impact the performance of rolling mill bearings in several ways:Temperature Effects on Lubrication: Temperatur...

Are there any specific alignment requirements for screw compressor bearings to optimize performance and reduce wear?

2024-04-22 Industry News

Alignment of screw compressor bearings is critical for optimizing performance and minimizing wear. Here are some specific alignment requirements:Parallel Alignment: Achieving preci...

What are the best practices for installing and mounting bearings in engineering machinery to ensure proper functionality?

2024-04-15 Industry News

Installing and mounting bearings correctly is crucial for ensuring the proper functionality and longevity of engineering machinery. Here are some best practices:Cleanliness: Thorou...

What are the potential risks associated with over-lubrication or under-lubrication of motor bearings?

2024-04-08 Industry News

Both over-lubrication and under-lubrication of motor bearings can lead to detrimental effects on their performance and lifespan. Here are the potential risks associated with each:O...

How do factors such as load capacity and rotational speed requirements influence the selection of bearings for different agricultural applications?

2024-04-01 Industry News

Factors such as load capacity and rotational speed requirements are crucial considerations when selecting bearings for agricultural applications because they directly affect the pe...

Industry Knowledge Expansion

1. The role of Series NU-Single Row Cylindrical Roller Bearings as floating bearings

As non-locating bearings, series NU-single row cylindrical roller bearings offer significant advantages in applications where axial movement or misalignment is inevitable. Unlike locating bearings, which restrict axial displacement, non-locating bearings provide flexibility, allowing components to adjust to varying operating conditions without undue stress or friction. This inherent ability to accommodate axial displacement makes NU-type bearings ideal for applications such as machine tool spindles, where thermal expansion or shaft deflection occurs during operation. By allowing slight movement along the axial plane, these bearings mitigate the risk of premature wear and damage to critical components, thereby enhancing system reliability and longevity. In addition to axial displacement, NU-type bearings excel in scenarios where shafts experience angular misalignment. Their design facilitates smooth rotation even in the presence of misalignment, ensuring consistent performance and reduced vibration levels. This capability is particularly valuable in applications such as conveyor systems and automotive drivetrains, where precise alignment is essential for optimal efficiency and productivity. The non-locating nature of series NU-single row cylindrical roller bearings affords engineers and designers greater flexibility in system design, enabling the creation of robust and reliable machinery capable of withstanding the rigors of real-world operating conditions.

2. Performance Characteristics and Operational Benefits

Series NU-single row cylindrical roller bearings stand out for their exceptional performance characteristics and operational benefits, making them indispensable components in various industrial applications.

a)Low Friction: NU-type bearings are engineered to minimize friction between rolling elements and raceways, thereby reducing energy consumption and heat generation. This characteristic is crucial for high-speed applications where efficiency is paramount, ensuring smooth and reliable operation over prolonged periods.

b)Reduced Noise Levels: The precision manufacturing processes employed in crafting NU-type bearings result in exceptionally smooth surfaces and tight tolerances, mitigating noise levels during operation. This is particularly beneficial in applications where noise reduction is essential for operator comfort, environmental considerations, or compliance with regulatory standards.

c)Enhanced Reliability: With their robust construction and superior material quality, NU-type bearings offer unmatched reliability even in demanding operating conditions. They excel in applications subjected to heavy loads, shock loads, and varying temperatures, maintaining consistent performance and longevity over extended service intervals.

d)Optimal Load Distribution: The design of NU-type bearings ensures uniform load distribution across the rolling elements, minimizing stress concentrations and extending bearing life. This feature is critical in applications where load variations are prevalent, ensuring smooth operation and preventing premature wear and failure.

Tel
+86-574-86597612
Email
ken@dhk-intl.com
Phone
+86-13957821917
Fax
+86-574-86597652

Add

Building 31, Chuang E Huigu, No.777, West Zhongguan RoadZhenhai Economic Development Zone, Ningbo, Zhejiang, China

Web Menu

Product Search

Language

Exit Menu

Series NU-Single Row Cylindrical Roller Bearings OEM/ODM

Categories

How Can We Help You?

Series NU-Single Row Cylindrical Roller Bearings

Ningbo DHK Precision Bearing Co., Ltd.

0+

0+

0+

Click to view our factory

CERTIFICATE

Latest News

What are the potential consequences of using improper or damaged rolling mill bearings in terms of safety and performance?

How do environmental factors, such as temperature and humidity, affect the performance of rolling mill bearings?

Are there any specific alignment requirements for screw compressor bearings to optimize performance and reduce wear?

What are the best practices for installing and mounting bearings in engineering machinery to ensure proper functionality?

What are the potential risks associated with over-lubrication or under-lubrication of motor bearings?

How do factors such as load capacity and rotational speed requirements influence the selection of bearings for different agricultural applications?

Industry Knowledge Expansion

CONTACT US

Tel

Email

Phone

Fax

Add

Web Menu

Product Search

Language

Share

Exit Menu

Series NU-Single Row Cylindrical Roller Bearings OEM/ODM

Categories

How Can We Help You?

Series NU-Single Row Cylindrical Roller Bearings

Ningbo DHK Precision Bearing Co., Ltd.

0+

0+

0+

Click to view our factory

CERTIFICATE

Latest News

What are the potential consequences of using improper or damaged rolling mill bearings in terms of safety and performance?

How do environmental factors, such as temperature and humidity, affect the performance of rolling mill bearings?

Are there any specific alignment requirements for screw compressor bearings to optimize performance and reduce wear?

What are the best practices for installing and mounting bearings in engineering machinery to ensure proper functionality?

What are the potential risks associated with over-lubrication or under-lubrication of motor bearings?

How do factors such as load capacity and rotational speed requirements influence the selection of bearings for different agricultural applications?

Industry Knowledge Expansion

CONTACT US

Tel

Email

Phone

Fax

Add