OEM/ODM Series 33000-Single Row Tapered Roller Bearings Company, Factory

Categories

Series 33000-Single Row Tapered Roller Bearings

Metric Series
Inch series

Design Variants
Cage
Tolerance
Internal clearance

Additional the standard metric single row taper roller bearings listed in the bearing table, DHK also produced single row taper roller bearings with flanges on outer rings (suffix R), only outer rings of taper roller bearing (prefix L), inner rings with the cage and rollers (prefix R) and other special taper roller bearings according to customer

Due to the single row taper roller bearings only can accommodate one direction axial force, these bearings are frequently used as pairs. Upon request, DHK can provide these bearings at Face- to-Face arrangement (suffix DF), Back-to-Back arrangement (suffix DB) or in tandem arrangement (suffix DT), as shown in the below sketch.
DHK taper roller bearings are fitted with pressed steel cages as standard. Because the cages of taper roller bearings usually protrude beyond the bearing faces, special care must be taken to follow the recommended abutment dimensions.

DHK single row taper roller bearings are produced to normal tolerance class (PN) as standard.

These bearings also may be produced with closer tolerance such as P6X on request.

Detail tolerance values are listed in the chapter of tolerance of metric taper roller bearings, page 14. The width tolerance of paired bearings is decided by the clearance and Ts.

Tolerances for DHK metric taper roller bearings (excluding tapered roller bearings)

All dimensions shown in (mm):

Tolerances in (um):

Inner Ring

Tolerance class PN/(Normal)


Nominal bore diameter		Deviation	Variation	Variation	Ring width deviation	Radial runout	Ring width deviation
<=	<=	△dmp	Vdp	Vdmp	△Bs	Kia	△Ts	△T1s	△T2s
10 18		0 -12	12	9	0 -120	15	+2000	+1000	+1000
18 30		0 -12	12	9	0 -120	18	+2000	+1000	+1000
30 50		0 -12	12	9	0 -120	20	+2000	+1000	+1000
50 80		0 -15	15	11	0 -150	25	+2000	+1000	+1000
80 120		0 -20	20	15	0 -200	30	+200 -200	+100 -100	+100 -100
120 180		0 -25	25	19	0 -250	35	+350 -250	+150 -150	+200 -100
180 250		0 -30	30	23	0 -300	50	+350 -250	+150 -150	+200 -100
250 315		0 -35	35	26	0 -350	60	+350 -250	+150 -150	+200 -100
315 400		0 -40	40	30	0 -400	70	+400 -400	+200 -200	+200 -200
400 500		0 -45	45	34	0 -450	85	+400 -400
500 630		0 -50	50	38	0 -500	100	+500 -500
630 800		0 -75	75	56	0 -750	120	+600 -600
800 1000		0 -100	100	75	0 -1000	120	+750 -750
1000 1250		0 -1250			0 -1250	120	+1000 -1000
1250 1600		0 -160			0 -1600	120	+1500 -1500
1600 2000		0 -200			0 -2000	120	+1500 -1500

Outer Ring

Tolerance class PN/(Normal)

Nominal outer diameter		Deviation	Variation	Variation	Radial runout
<=	<=	△Dmp	VDp	VDmp	Kia
18 30		0 -12	12	9	18
30 50		0 -14	14	11	20
50 80		0 -16	16	12	25
80 120		0 -18	18	14	35
120 150		0 -20	20	15	40
150 180		0 -25	25	19	45
180 250		0 -30	30	23	50
250 315		0 -35	35	26	60
315 400		0 -40	40	30	70
400 500		0 -45	45	34	80
500 630		0 -50	50	38	100
630 800		0 -70	70	55	120
800 1000		0 -100	100	75	120
1000 1250		0 -125	125	94	120
1250 1600		0 -160	160	120	120
1600 2000		0 -200			120
2000 2500		0 -250

Tolerances for DHK metric taper roller bearings (excluding tapered roller bearings)

All dimensions shown in (mm):

Tolerances in (um):

Inner Ring

Tolerance class P6X

Nominal bore diameter		Deviation	Variation	Variation	Ring width deviation	Radial runout	Ring width deviation
<=	<=	△dmp	Vdp	Vdmp	△Bs	Kia	△Ts	△T1s	△T2s
10 18		0 -12	12	9	0 -50	15	+100 0	+50～0	+50～0
18 30		0 -12	12	9	0 -50	18	+100 0	+50～0	+50～0
30 50		0 -12	12	9	0 -50	20	+100 0	+50～0	+50～0
50 80		0 -15	15	11	0 -50	25	+100 0	+50～0	+50～0
80 120		0 -20	20	15	0 -50	30	+100 0	+50～0	+50～0
120 180		0 -25	25	19	0 -50	35	+150 0	+50～0	+100～0
180 250		0 -30	30	23	0 -50	50	+150 0	+50～0	+100～0
250 315		0 -35	35	26	0 -50	60	+200 0	+100～0	+100～0
315 400		0 -40	40	30	0 -50	70	+200 0	+100～0	+100～0
400 500
500 630
630 800
800 1000

Outer Ring
Tolerance class P6X

Nominal outer diameter		Deviation	Variation	Variation	Ring width deviation	Radial runout
<=	<=	△Dmp	VDp	VDmp	△Cs	Kea
18 30		0 -12	12	9	0 -100	18
30 50		0 -14	14	11	0 -100	20
50 80		0 -16	16	12	0 -100	25
80 120		0 -18	18	14	0 -100	35
120 150		0 -20	20	15	0 -100	40
150 180		0 -25	25	19	0 -100	45
180 250		0 -30	30	23	0 -100	50
250 315		0 -35	35	26	0 -100	60
315 400		0 -40	40	30	0 -100	70
400 500		0 -45	45	34	0 -100	80
500 630		0 -50	50	38	0 -100	100
630 800
800 1000

The width tolerance △Cs is identical to△Bs of inner ring of the same bearing

Tolerances for DHK metric taper roller bearings (excluding tapered roller bearings)

All dimensions shown in (mm):

Tolerances in (um):

Inner Ring

Tolerance class P5

Nominal bore diameter		Deviation	Variation	Variation	Ring width deviation	Radial runout	Side face runout
<=	<=	△dmp	Vdp	Vdmp	△Bs	Kia	Ｓd	△Ts
10 18		0 -7	5	5	0 -200	5	7	+200 -200
18 30		0 -8	6	5	0 -200	5	8	+200 -200
30 50		0 -10	8	5	0 -240	6	8	+200 -200
50 80		0 -12	9	6	0 -300	7	8	+200 -200
80 120		0 -15	11	8	0 -400	8	9	+200 -200
120 180		0 -18	14	9	0 -500	11	10	+350 -250
180 250		0 -22	17	11	0 -600	13	11	+350 -250
250 315		0 -25	19	13	0 -700	16	13	+350 -250
315 400		0 -30	23	15	0 -800	19	15	+400 -400
400 500		0 -35	26	18	0 -900	22	17	+400 -400
500 630		0 -40	30	20	0 -1000	26	20	+500 -500
630 800		0 -50	50	25	0 -1500	30	26	+600 -600
800 1000		0 -65	60	30	0 -2000	35	32	+750 -750

Outer Ring
Tolerance class P5

Nominal outer diameter		Deviation	Variation	Variation	Radial runout	Outside inclination variation
<=	<=	△Dmp	VDp	VDmp	Kea
18 30		0 -8	6	5	6	8
30 50		0 -9	7	5	7	8
50 80		0 -11	8	6	8	8
80 120		0 -13	10	7	10	9
120 150		0 -15	11	8	11	10
150 180		0 -18	14	9	13	10
180 250		0 -20	15	10	15	11
250 315		0 -25	19	13	18	13
315 400		0 -28	22	14	20	13
400 500		0 -33	25	17	23	15
500 630		0 -38	29	19	25	18
630 800		0 -45	34	23	30	20
800 1000		0 -60	45	30	35	25
1000 1250		0 -80	75	38	40	30
1250 1600		0 -100	90	45	45	35

The width tolerance △Cs is identical to△Bs of inner ring of the same bearing

Tolerances for DHK metric taper roller bearings (excluding tapered roller bearings)
All dimensions shown in (mm):
Tolerances in (um):

Inner Ring
Tolerance class P4

Nominal bore diameter		Deviation	Variation	Variation	Ring width deviation	Radial runout	Side face runout	Side face runout	Ring width deviation
<=	<=	△dmp △ds	Vdp	Vdmp	△Bs	kia	Sd	Sia	△Ts
10 18		0 -5	4	4	0 -200	3	3	3	+200 -200
18 30		0 -6	5	4	0 -200	3	4	4	+200 -200
30 50		0 -7	6	5	0 -240	4	4	4	+200 -200
50 80		0 -8	7	5	0 -300	4	5	4	+200 -200
80 120		0 -10	8	5	0 -400	5	5	5	+200 -200
120 180		0 -13	10	7	0 -500	6	6	7	+350 -250
180 250		0 -15	11	8	0 -600	8	7	8	+350 -250

Outer Ring
Tolerance class P4

Nominal outer diameter		Deviation	Variation	Variation	Radial runout	Outside inclination variation	Side face runout
<=	<=	△Dmp △Ds	VDp	VDmp	Kea	SD	Sea
18 30		0 -6	5	4	4	4	5
30 50		0 -7	5	5	5	4	5
50 80		0 -9	7	5	5	4	5
80 130		0 -10	8	5	6	5	6
130 150		0 -11	8	6	7	5	7
150 180		0 -13	10	7	8	5	8
180 250		0 -15	11	8	10	7	10
250 315		0 -18	14	9	11	8	10
315 400		0 -20	15	10	13	10	13

The width tolerance △Cs and VCs are identical to△Bs and VBs of inner ring of the same bearing

The clearance of single row taper roller bearings is adjusted one bearing against another during mounting.

DHK taper roller bearing pairs arranged face-to- face (suffix DF) and back-to-back(suffix DB) are produced with internal clearance values, as listed in the table below. DHK can provide bearing pairs with special axial clearance upon request.

Axial Internal Clearance Of Paired DHK taper roller bearings,arranged face to face(DF) and back to back(DB)

Bore Dia. (mm)		Axial intcrnal clearance Series（μm）
>	<=	329 Min max	320 Min max X	330 Min max	331，3．2，332，332 Min max	303，323 Min max	313 Min max
-- 30		-- --	80 120	-- --	100 140	130 170	60 100
30 40		-- --	100 140	-- --	120 160	140 180	70 110
40 50		-- --	120 160	180 220	140 180	160 200	80 120
50 65		-- --	140 180	200 240	160 200	180 220	100 140
65 80		-- --	160 200	250 290	180 220	200 260	110 170
80 100		270 310	190 230	350 390	210 270	240 300	110 170
100 120		270 330	220 280	340 400	220 280	280 340	130 190
120 140		310 370	240 300	340 400	240 300	330 390	160 220
140 160		370 430	270 330	340 400	270 330	370 430	180 240
160 180		370 430	310 370	-- --	310 370	390 450	-- --
180 190		370 430	340 400	-- --	340 400	440 500	-- --
190 200		390 450	340 400	-- --	340 400	440 500	-- --
200 225		440 500	390 450	-- --	390 450	490 550	-- --
225 250		440 500	440 500	-- --	440 500	540 600	-- --
250 280		540 500	490 55	-- --	490 550	-- --	-- --
280 300		640 700	540 600	-- --	540 600	-- --	-- --
300 340		640 700	590 650	-- --	590 650	-- --	-- --

Model		Dimensions								Extreme speed		Rated load		Calculation factor			Abutment and fillet dimensions(mm)						Weight [kg]
DIN720	ISO355	d	D	B	C	T	r1,r2 min	r3,r4 min	a	Grease lubrication	Oil lubrication	Dynamic load	Static load	e	Y	Yo	Da max	db min	da min	Db min	Ca min	Cb min	Weight [kg]
33009	T2CE045	45	75	24	19	24	1	1	16	4000	5000	72	104	0.29	2.04	1.2	51	51	67	71	4	5	0.43
33010	T2CE050	50	80	24	19	24	1	1	17	4500	6000	75	114	0.32	1.9	1.04	56	56	72	76	4	5	0.42
33011	T2CE055	55	90	27	21	27	1.5	1.5	19	4000	5300	93	143	0.31	1.92	1.06	63	62	81	86	5	6	0.67
33012	T2CE060	60	95	27	21	27	1.5	1.5	20	3800	5000	96.5	150	0.33	0.83	1.01	67	67	85	90	5	6	0.73
33013	T2CE065	65	100	27	21	27	1.5	1.5	21	3400	4500	100	163	0.35	1.72	0.95	72	72	89	96	5	6	0.78
33013	T2CE080	80	125	36	29.5	36	1.5	1.5	26	2600	3600	176	290	0.28	2.16	1.19	90	87	112	119	6	6.5	1.67
33014	T2CE070	70	110	31	25.5	31	1.5	1.5	22	3200	4300	137	224	0.28	2.11	1.16	78	77	99	105	5	5.5	1.14
33015	T2CE075	75	115	31	25.5	31	1.5	1.5	23	3000	4000	140	232	0.3	2.01	1.11	83	82	104	110	6	5.5	1.12
33017	T2CE085	85	130	36	29.5	36	1.5	1.5	26	2600	3600	183	315	0.29	2.06	1.13	94	92	118	125	6	6.5	1.76
33018	T2CE090	90	140	39	32.5	39	2	1.5	28	2200	3200	216	365	0.27	2.23	1.23	100	99	127	135	7	6.5	2.3
33019	T2CE095	95	145	39	32.5	39	2	1.5	29	2200	3200	220	380	0.28	2.16	1.19	104	104	131	139	1	6.5	2.24
33020	T2CE100	100	150	39	32.5	39	2	1.5	29	2000	3000	224	400	0.29	2.09	1.15	108	109	135	143	7	6.5	2.33
33021	T2DE105	105	160	43	34	43	2.5	2	31	1900	2800	265	450	0.28	2.12	1.17	116	115	145	153	7	9	3.09
33022	T2DE110	110	170	47	37	47	2.5	2	33	1800	2600	300	520	0.29	20.9	1.15	123	120	152	161	7	10	3.71
33024	T2DE120	120	180	48	38	48	2.5	2	36	1800	2600	310	560	0.31	1.97	1.08	132	130	160	171	6	10	4.06
33026	--	130	200	55	43	55	2.5	2	--	1500	2000	390	705	0.34	1.76	0.97	142	143	178	192	--	--	6.19
33028	--	140	210	56	44	86	2.5	2	--	1500	2000	406	758	0.36	1.37	0.92	152	152	186	202	--	--	6.61
33030	--	150	225	59	46	59	3	2.5	--	1500	2000	457	865	0.37	1.6	0.9	162	164	213	217	--	--	8.15
33108	T2CE040	40	75	26	20.5	26	1.5	1.5	18	5000	6700	80	104	0.36	1.69	0.93	47	47	65	71	4	5.5	0.52
33109	T3CE045	45	80	26	20.5	26	1.5	1.5	19	4500	6000	85	116	0.38	1.57	0.86	52	52	69	77	4	5.5	0.53
33110	T3CE050	50	85	26	20	26	1.5	1.5	20	4300	5600	86.5	122	0.41	1.46	0.8	56	57	74	82	4	6	0.6
33111	T3CE055	55	95	30	23	30	1.5	1.5	22	3800	5000	114	163	0.37	1.6	0.88	62	62	83	91	5	7	0.89
33112	T3CE060	60	100	30	23	30	1.5	1.5	23	3600	4800	116	173	0.4	1.51	0.83	67	67	88	96	5	7	0.89
33113	T3CE065	65	110	34	26.5	34	1.5	1.5	26	3200	4300	150	228	0.39	1.55	0.85	73	72	96	106	6	7.5	1.34
33113	T3DE080	80	130	37	29	37	2	1.5	31	2600	3600	190	300	0.42	1.44	0.79	89	89	114	126	6	8	1.93
33114	T3DE070	70	120	37	29	37	2	1.5	28	3000	4000	176	260	0.38	1.58	0.87	79	79	104	115	6	8	1.75
33115	T3DE075	75	125	37	29	37	2	1.5	30	2800	3800	180	275	0.4	1.51	0.83	84	84	109	120	6	8	1.74
33117	T3DE085	85	140	41	32	41	2.5	1.5	33	2400	3400	220	355	0.41	1.48	0.81	95	95	122	135	7	9	2.38
33118	T3DE090	90	150	45	35	45	2.5	2	36	2000	3000	265	425	0.4	1.51	0.83	100	100	130	144	7	10	3.07
33120	--	100	165	52	40	52	2.5	2	--	2000	3000	325	523	0.41	1.48	0.81	112	12	142	142	--	--	4.29
33121	--	105	175	56	44	56	2.5	2	--	1700	2400	360	307	0.4	1.48	0.82	117	116	150	150	--	--	5.33
33122	--	110	180	56	43	56	2.5	2	--	1800	2600	369	630	0.43	1.4	0.8	120	121	170	174	--	--	5.55
33124	--	120	200	62	48	62	2.5	2	--	1700	2400	462	785	0.35	1.7	0.95	132	133	172	192	--	--	7.73
33205	T2DE025	25	52	22	18	22	1	1	14	4200	10000	49	58.5	0.35	1.71	0.94	30	31	43	49	4	4	0.22
33206	T2DE030	30	62	25	19.5	25	1	1	16	6000	8000	65.5	78	0.34	1.76	0.97	36	36	53	59	5	5.5	0.35
33207	T2DE035	35	72	28	22	28	1.5	1.5	18	5300	7000	86.5	106	0.35	1.7	0.93	42	42	61	68	5	6	0.59
33208	T2DE040	40	80	32	25	32	1.5	1.5	21	4500	6000	106	134	0.36	1.68	0.92	47	47	67	76	5	7	0.74
33209	T3DE045	45	85	32	25	32	1.5	1.5	22	4300	5600	108	146	0.39	1.56	0.86	52	52	72	81	5	7	0.79
33210	T3DE050	50	90	32	24.5	32	1.5	1.5	23	3800	5000	114	163	0.41	1.45	0.8	57	57	77	87	5	7.5	0.85
33211	T3DE055	55	100	35	27	35	2	1.5	26	3400	4500	137	196	0.4	1.5	0.83	62	64	85	96	6	8	1.21
33212	T3EE060	60	110	38	29	38	2	1.5	28	3000	4000	170	240	0.4	1.48	0.82	69	69	93	105	6	9	1.5
33213	T3EE065	65	120	42	32	41	2	1.5	30	2800	3800	204	285	0.39	1.54	0.85	74	74	102	115	6	9	2.04
33214	T3EE070	70	125	41	32	41	2	1.5	31	2600	3600	212	300	0.41	1.47	0.81	79	79	107	120	7	9	2.06
33215	T3EE075	75	130	41	31	41	2	1.5	32	2400	3400	208	310	0.43	1.4	0.77	83	84	111	125	7	10	2.24
33216	T3EE080	80	140	46	35	46	2.5	2	35	2200	3200	250	390	0.43	1.41	0.78	89	90	119	135	7	11	3.01
33217	T3EE085	85	150	49	37	49	2.5	2	37	2000	3000	290	440	0.42	1.43	0.79	95	95	128	144	7	12	3.5
33220	--	100	180	63	48	63	3	2.5	--	1700	2400	429	655	0.4	1.5	0.8	112	112	151	151	--	--	6.95
33221	--	105	190	68	52	68	3	2.5	--	1800	2600	497	790	0.4	1.49	0.82	119	117	159	159	--	--	8.43

Ningbo DHK Precision Bearing Co., Ltd.

0+

Years Experience Working

0+

Customer Service

0+

Patented Technology

CERTIFICATE

DHK has passed IATF16949 quality system certification and ISO14001 environmental management system certification；and DHK is a national high-tech enterprise.

What are the potential consequences of using improper or damaged rolling mill bearings in terms of safety and performance?

2024-05-07 Industry News

Using improper or damaged rolling mill bearings can have significant consequences in terms of safety and performance: Increased risk of machinery failure: The ramifications of be...

How do environmental factors, such as temperature and humidity, affect the performance of rolling mill bearings?

2024-05-01 Industry News

Environmental factors like temperature and humidity can significantly impact the performance of rolling mill bearings in several ways:Temperature Effects on Lubrication: Temperatur...

Are there any specific alignment requirements for screw compressor bearings to optimize performance and reduce wear?

2024-04-22 Industry News

Alignment of screw compressor bearings is critical for optimizing performance and minimizing wear. Here are some specific alignment requirements:Parallel Alignment: Achieving preci...

What are the best practices for installing and mounting bearings in engineering machinery to ensure proper functionality?

2024-04-15 Industry News

Installing and mounting bearings correctly is crucial for ensuring the proper functionality and longevity of engineering machinery. Here are some best practices:Cleanliness: Thorou...

What are the potential risks associated with over-lubrication or under-lubrication of motor bearings?

2024-04-08 Industry News

Both over-lubrication and under-lubrication of motor bearings can lead to detrimental effects on their performance and lifespan. Here are the potential risks associated with each:O...

How do factors such as load capacity and rotational speed requirements influence the selection of bearings for different agricultural applications?

2024-04-01 Industry News

Factors such as load capacity and rotational speed requirements are crucial considerations when selecting bearings for agricultural applications because they directly affect the pe...

Industry Knowledge Expansion

1. Versatile Applications Across Industries

Series 33000-Single Row Tapered Roller Bearings exhibit a remarkable versatility that transcends industry boundaries, making them indispensable components in a myriad of applications. Their robust construction and ability to withstand high radial and axial loads render them suitable for various industries, including automotive, aerospace, mining, and construction. In the automotive sector, these bearings find extensive use in wheel hubs, transmission systems, and differential assemblies. Their ability to accommodate both radial and axial forces makes them ideal for supporting vehicle weight and transmitting torque, ensuring smooth and reliable operation on the road. Their compact design and high load-carrying capacity contribute to improved fuel efficiency and vehicle performance. In aerospace applications, where precision, reliability, and weight considerations are paramount, Series 33000-Single Row Tapered Roller Bearings play a critical role in aircraft landing gear systems, engine components, and flight control mechanisms. Their ability to operate under extreme temperatures and dynamic conditions makes them well-suited for the demanding requirements of aviation. In the mining and construction industries, where heavy-duty equipment operates in harsh environments, these bearings excel in supporting conveyor systems, crushers, and earthmoving machinery. Their rugged construction and resistance to contamination ensure uninterrupted operation even in dusty, abrasive, or corrosive conditions, contributing to increased productivity and reduced downtime. Series 33000-Single Row Tapered Roller Bearings are integral components in industrial machinery, such as machine tools, paper mills, and textile machines, where precise motion control and high reliability are essential. Their versatility extends to renewable energy applications, including wind turbines and solar tracking systems, where they contribute to the efficient conversion of renewable resources into electricity.

2. Maintenance and Service Considerations

While Series 33000-Single Row Tapered Roller Bearings are renowned for their durability and reliability, proper maintenance is imperative to ensure optimal performance and longevity. A proactive approach to maintenance not only minimizes downtime but also extends the service life of these critical components. Regular inspection is the cornerstone of effective maintenance practices. Visual examination of the bearings for signs of wear, corrosion, or damage allows early detection of potential issues, enabling timely corrective action to be taken. Monitoring operating temperatures and vibration levels can provide valuable insights into the health of the bearings and the overall condition of the machinery. Lubrication plays a pivotal role in the performance of tapered roller bearings. Adhering to recommended lubrication intervals and using the appropriate lubricant is essential for minimizing friction, reducing wear, and preventing premature failure. Whether utilizing grease or oil lubrication systems, ensuring adequate lubricant levels and proper distribution is paramount for maximizing bearing life and performance. In addition to regular maintenance tasks, periodic bearing replacement may be necessary, particularly in high-load or high-speed applications. Training maintenance personnel in proper handling, installation, and maintenance procedures is essential for ensuring the effectiveness of maintenance programs. By equipping personnel with the necessary knowledge and skills, organizations can mitigate the risk of improper handling or maintenance practices leading to premature bearing failure.

Tel
+86-574-86597612
Email
ken@dhk-intl.com
Phone
+86-13957821917
Fax
+86-574-86597652

Add

Building 31, Chuang E Huigu, No.777, West Zhongguan RoadZhenhai Economic Development Zone, Ningbo, Zhejiang, China

Web Menu

Product Search

Language

Exit Menu

Series 33000-Single Row Tapered Roller Bearings OEM/ODM

Categories

How Can We Help You?

Series 33000-Single Row Tapered Roller Bearings

Ningbo DHK Precision Bearing Co., Ltd.

0+

0+

0+

Click to view our factory

CERTIFICATE

Latest News

What are the potential consequences of using improper or damaged rolling mill bearings in terms of safety and performance?

How do environmental factors, such as temperature and humidity, affect the performance of rolling mill bearings?

Are there any specific alignment requirements for screw compressor bearings to optimize performance and reduce wear?

What are the best practices for installing and mounting bearings in engineering machinery to ensure proper functionality?

What are the potential risks associated with over-lubrication or under-lubrication of motor bearings?

How do factors such as load capacity and rotational speed requirements influence the selection of bearings for different agricultural applications?

Industry Knowledge Expansion

CONTACT US

Tel

Email

Phone

Fax

Add

Web Menu

Product Search

Language

Share

Exit Menu

Series 33000-Single Row Tapered Roller Bearings OEM/ODM

Categories

How Can We Help You?

Series 33000-Single Row Tapered Roller Bearings

Ningbo DHK Precision Bearing Co., Ltd.

0+

0+

0+

Click to view our factory

CERTIFICATE

Latest News

What are the potential consequences of using improper or damaged rolling mill bearings in terms of safety and performance?

How do environmental factors, such as temperature and humidity, affect the performance of rolling mill bearings?

Are there any specific alignment requirements for screw compressor bearings to optimize performance and reduce wear?

What are the best practices for installing and mounting bearings in engineering machinery to ensure proper functionality?

What are the potential risks associated with over-lubrication or under-lubrication of motor bearings?

How do factors such as load capacity and rotational speed requirements influence the selection of bearings for different agricultural applications?

Industry Knowledge Expansion

CONTACT US

Tel

Email

Phone

Fax

Add